Kyocera M6353cidn - scan defaults

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kuby
    Senior Tech

    1,000+ Posts
    • Oct 2007
    • 1405

    #1

    Kyocera M6353cidn - scan defaults

    Guys is there a way to set the scan default so it will come out in portrait instead of landscape when viewed. I can set it and scan and it comes out OK but you have to set it each time. Is there not a default setting you can set so you will not have to do this each time.

    Thanks

    Sorry it is a M6535cidn
    Last edited by kuby; 07-13-2016, 05:12 PM.
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23008

    #2
    Re: Kyocera M6353cidn - scan defaults

    Are you sure about that model number? That doesn't bring up anything on the Kyocera public site. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • kuby
      Senior Tech

      1,000+ Posts
      • Oct 2007
      • 1405

      #3
      Re: Kyocera M6535cidn - scan defaults

      Found the setting...thanks

      Comment

      Working...