job log removal from fs-1135

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • subaro
    Service Manager

    1,000+ Posts
    • Oct 2010
    • 1274

    #1

    job log removal from fs-1135

    Anyone know how to remove the job log from the command center under the JOB menu. The history is there that i want to remove. there is no check box as in the address book to delete.
    THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22973

    #2
    Re: job log removal from fs-1135

    Have you tried an engine board reset? EGRE? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • subaro
      Service Manager

      1,000+ Posts
      • Oct 2010
      • 1274

      #3
      Re: job log removal from fs-1135

      Originally posted by blackcat4866
      Have you tried an engine board reset? EGRE? =^..^=
      In the past i have tried that command and it does not work with this model. I'll give it a go once more after udating firmware ect.
      THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

      Comment

      • JR2ALTA
        Service Manager

        Site Contributor
        1,000+ Posts
        • Feb 2010
        • 2029

        #4
        Re: job log removal from fs-1135

        Originally posted by subaro
        In the past i have tried that command and it does not work with this model. I'll give it a go once more after udating firmware ect.
        i suppose you could back up data and then run a sim21

        Comment

        • subaro
          Service Manager

          1,000+ Posts
          • Oct 2010
          • 1274

          #5
          Re: job log removal from fs-1135

          Originally posted by JR2ALTA
          i suppose you could back up data and then run a sim21


          This machine does not have service mode u21. Some other models did not have them initially, [fs-3640 -- fs2626 ] . Later firmware update added u21 and some other adjustment modes. The job logs contain previous custome email address which should be wiped when re-deploying the machine. dealer support is my last resort, so may have to shoot them the question.
          THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

          Comment

          Working...