[Misc] Updating firmware, UTAX 3005ci

[Larhal]

Hi All,
Just picked up a customer with a UTAX 3005ci, Same as Task Alfa 3051, Can I use Kyocera firmware to update a Utax?

Also this unit has never been updated. It has 01.01.0011 (2013-06-14) on it. I noticed we are at 05.04.0040 (2016-06-27).

How should I update this one? By going to 02.xxx then 03.xxx and so on?

Any help would be appreciated.

Thanks
Larhal

[habik]

Re: Updating firmware, UTAX 3005ci

Same. And straight up to the latest.


Sent from my iDon't believe in marketing device using Tapatalk

[Larhal]

Re: Updating firmware, UTAX 3005ci

Thank you habik.

I realized that I had to go into U25 to allow the firmware to update also. Went right up to the latest version no problem.

Thanks again,

Larhal

[copier parts n.ireland]

Re: Updating firmware, UTAX 3005ci

yes,i have access to utax firmware,and have on some ocassions used for kyocera brand,firmware is up to version 5.01.

[JaromÃr]

Re: Updating firmware, UTAX 3005ci

Hello
I don't want to start a new thread
Could somebody send me firmware UTAX 3005ci + Czech language? Thank you in advance

[Mostafa Mostafa]

Re: Updating firmware, UTAX 3005ci

Can you please share a source of same firmware
I need it if you can help
thanks in advance

[copier tech]

Re: Updating firmware, UTAX 3005ci

Can you please share a source of same firmware
I need it if you can help
thanks in advance

We're happy to help, please contact us at either site below.