TA4501i C0800 and Jam 0100

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • habik
    Service Manager

    Site Contributor
    1,000+ Posts
    • Apr 2010
    • 2013
    #1

    TA4501i C0800 and Jam 0100

    Just FYI.
    Found something interesting when using ADF and or your machine starts to freeze or you can't cancel a job unless you do U906 or reboot.
    Look for trapped ADF wire harness or broken cable or something of that nature. Mine got pinched so it was easier to spot. If it would brake without being seen the point of breakage it would take me a lot longer.
    Those codes correspond to MFP board so signalling corrupt.
    Hope this helps scratching heads..

    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008
      #2
      Re: TA4501i C0800 and Jam 0100

      Congratulations on a great find! Harness problems can be very difficult to track down without completely pinning it out. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • copiman
          Technician

          500+ Posts
          • Sep 2011
          • 861
          #3
          Re: TA4501i C0800 and Jam 0100

          Thanks habik for taking the time to post this. I come here for support and try to give support when I can. Posts like yours helps everyone.

            Comment

            Previous template Next
            Working...