FS-1120D, going crazy?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3347
    #16
    Re: FS-1120D, going crazy?

    Now @100k the machine is spitting out a sheet with: "REPLACE MAINTENANCE KIT"
    Did I made a mistake or what?

    Any help please.

    Hans
    “ Sent from my Intel 80286 using MS-DOS 2.0 “
    https://www.copytechnet.com/images/smilies/biggrin.png

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22930
        #17
        Re: FS-1120D, going crazy?

        Did you change just the drum, or the whole kit? =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          • Hansoon
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Sep 2007
            • 3347
            #18
            Re: FS-1120D, going crazy?

            Only the drum unit Cat, since the waste box was full and the drum was showing lines.

            Hans
            “ Sent from my Intel 80286 using MS-DOS 2.0 “
            https://www.copytechnet.com/images/smilies/biggrin.png

              Comment

              • blackcat4866
                Master Of The Obvious

                Site Contributor
                10,000+ Posts
                • Jul 2007
                • 22930
                #19
                Re: FS-1120D, going crazy?

                So you didn't clear the maintenance kit message. =^..^=
                If you'd like a serious answer to your request:
                1) demonstrate that you've read the manual
                2) demonstrate that you made some attempt to fix it.
                3) if you're going to ask about jams include the jam code.
                4) if you're going to ask about an error code include the error code.
                5) You are the person onsite. Only you can make observations.

                blackcat: Master Of The Obvious =^..^=

                  Comment

                  • Hansoon
                    Field Supervisor

                    Site Contributor
                    2,500+ Posts
                    • Sep 2007
                    • 3347
                    #20
                    Re: FS-1120D, going crazy?

                    Errr....... NO. That seems to be the problem. I believed that time that the chip on the drum unit would take care of that. What to do now?

                    Hans
                    “ Sent from my Intel 80286 using MS-DOS 2.0 “
                    https://www.copytechnet.com/images/smilies/biggrin.png

                      Comment

                      • JR2ALTA
                        Service Manager

                        Site Contributor
                        1,000+ Posts
                        • Feb 2010
                        • 2028
                        #21
                        Re: FS-1120D, going crazy?

                        so if an 1120d and 1300d are truly compatible machines, all i can say is the 1300d doesn't have a "maintenance kit" nor does the manual speak of any reset procedure

                          Comment

                          • blackcat4866
                            Master Of The Obvious

                            Site Contributor
                            10,000+ Posts
                            • Jul 2007
                            • 22930
                            #22
                            Re: FS-1120D, going crazy?

                            Do you plan on replacing the maintenance kit? =^..^=
                            If you'd like a serious answer to your request:
                            1) demonstrate that you've read the manual
                            2) demonstrate that you made some attempt to fix it.
                            3) if you're going to ask about jams include the jam code.
                            4) if you're going to ask about an error code include the error code.
                            5) You are the person onsite. Only you can make observations.

                            blackcat: Master Of The Obvious =^..^=

                              Comment

                              • Hansoon
                                Field Supervisor

                                Site Contributor
                                2,500+ Posts
                                • Sep 2007
                                • 3347
                                #23
                                Re: FS-1120D, going crazy?

                                Yes, Cat. After I replaced the drum unit only it is working well. Had to replace the take up system rollers too ofcourse. Don't know how long the fuser and developing unit will live. I just want to get rid of that message. Customer is nervous about it and I don't want to spend again on this baby.

                                .....

                                so if an 1120d and 1300d are truly compatible machines, all i can say is the 1300d doesn't have a "maintenance kit" nor does the manual speak of any reset procedure
                                Thanks JR2ALTA but it was (is still?) ejecting a page with a message to "REPLACE MAINTENANCE KIT". I want to get rid of that.

                                Hans
                                “ Sent from my Intel 80286 using MS-DOS 2.0 “
                                https://www.copytechnet.com/images/smilies/biggrin.png

                                  Comment

                                  • blackcat4866
                                    Master Of The Obvious

                                    Site Contributor
                                    10,000+ Posts
                                    • Jul 2007
                                    • 22930
                                    #24
                                    Re: FS-1120D, going crazy?

                                    I think the message will depart when the machine sees the new units EEPROM chips. Like JRALTA says, I do not see anything about a PM counter in the service mode. =^..^=
                                    If you'd like a serious answer to your request:
                                    1) demonstrate that you've read the manual
                                    2) demonstrate that you made some attempt to fix it.
                                    3) if you're going to ask about jams include the jam code.
                                    4) if you're going to ask about an error code include the error code.
                                    5) You are the person onsite. Only you can make observations.

                                    blackcat: Master Of The Obvious =^..^=

                                      Comment

                                      • Hansoon
                                        Field Supervisor

                                        Site Contributor
                                        2,500+ Posts
                                        • Sep 2007
                                        • 3347
                                        #25
                                        Re: FS-1120D, going crazy?

                                        Thanks for all your kind assistance guys.

                                        I think the message will depart when the machine sees the new units EEPROM chips. Like JRALTA says, I do not see anything about a PM counter in the service mode. =^..^=
                                        No, it didn't. That's my problem. I replaced the drum unit @ 75k but than @ 100k the message came up.

                                        Hans
                                        “ Sent from my Intel 80286 using MS-DOS 2.0 “
                                        https://www.copytechnet.com/images/smilies/biggrin.png

                                          Comment

                                          Previous 1 2 template Next
                                          Working...