Common Developer Issue with Kyocera Taskalfa 3051ci

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Kyo fan
    Trusted Tech

    250+ Posts
    • Dec 2013
    • 368
    #16
    Re: Common Developer Issue with Kyocera Taskalfa 3051ci

    Thanks for updates. I was wondering is it possible to put something next to this black roller to fill this gap and hopefully save some time and money.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22973
        #17
        Re: Common Developer Issue with Kyocera Taskalfa 3051ci

        Originally posted by Kyo fan
        Thanks for updates. I was wondering is it possible to put something next to this black roller to fill this gap and hopefully save some time and money.
        The new developer spacers are from the 6551/7551 developing unit. They have bearings unlike the original. And most likely it's the aluminum shaft that wears as much or more than the spacers. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          • daveh12
            Trusted Tech

            100+ Posts
            • Jul 2012
            • 157
            #18
            Re: Common Developer Issue with Kyocera Taskalfa 3051ci

            Originally posted by Ropariva
            Last week I came across a machine with these symptoms for the first time since following this thread.
            I'm able to confirm that the thin black roller that correctly spaces the magnetic roller from the drum was worn in the centre at the end corresponding with the quality problem.


            The replacement developer unit has obviously been beefed up in this area and the this black roller has now been replaced by a much thicker white nylon roller.


            It's a shame that we are unable to purchase these rollers as a spare part [emoji53]
            Thanks for the update.


            Sent from my iPhone using Tapatalk

              Comment

              Previous 1 2 template Next
              Working...