CS-1650

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23008
    #16
    Re: CS-1650

    Solved 2 issues:
    1) Loaded 4.11.02 SFU, Ran as Administrator, and changed firewall setting for the rule FTP Allow, to Allow all Services. Connects and scans. The DF doesn't work, but that's the least of my worries.

    2) The second network cable is intermittent. Probably chewed through by the cat (again). Time to make another cable. Maybe that will get me printing.

    3) Tried email, but no dice. It would require a local email server port 25.

    Thanks again.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 23008
        #17
        Re: CS-1650

        2) Bad switch port. Swapped ports and we're printing.

        Just to figure out the original misfeeds and replace the drum and I think we're good. Apparently they're in-stock. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          Previous 1 2 template Next
          Working...