Kyocera KM 1650 Registration switch

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ecoworld
    Technician
    • Apr 2009
    • 15
    #1

    [Jamming] Kyocera KM 1650 Registration switch

    Hi everybody
    Can anyone indicate me where the registration switch is located on the Kyocera KM 1650 machine. I am getting misfeeds and JAM 11 on the machine.

    Thanks
    Tags: jam, kyocera, registration, switch
    • habik
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2010
      • 2013
      #2
      Re: Kyocera KM 1650 Registration switch

      Originally posted by ecoworld
      Hi everybody
      Can anyone indicate me where the registration switch is located on the Kyocera KM 1650 machine. I am getting misfeeds and JAM 11 on the machine.

      Thanks
      The registration actuator is in the middle just below the silver roller. The actuator sits in white cover and is spring loaded (usually). If the spring on the rear side pops off or is lost, the actuator may be slow to return causing misfeeds. Also check your rollers are not worn and the pick up roller is with the black (updated)ribbed rubber instead of grey.
      Depending on paper you can get 70-120k out of those rollers, usually.



      Sent from portable device using fast cheapset!
      .OK Google! ... will I need Berrocca this morning?
      Firmwares HERE

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22973
          #3
          Re: Kyocera KM 1650 Registration switch

          It looks a lot like this:
          I'm sitting 2 feet away from one.

          photo.jpg

          =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • habik
              Service Manager

              Site Contributor
              1,000+ Posts
              • Apr 2010
              • 2013
              #4
              Re: Kyocera KM 1650 Registration switch

              Originally posted by blackcat4866
              It looks a lot like this:
              I'm sitting 2 feet away from one.

              [ATTACH=CONFIG]38673[/ATTACH]

              =^..^=
              Bet you don't use bypass much

              Sent from portable device using fast cheapset!
              .OK Google! ... will I need Berrocca this morning?
              Firmwares HERE

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22973
                  #5
                  Re: Kyocera KM 1650 Registration switch

                  It's a great place to store extra paper, that's it though. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...