Kyocera Scanner Pins KM-2560/3060

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • monarke4
    Trusted Tech

    Site Contributor
    100+ Posts
    • Oct 2018
    • 178
    #1

    [CQ] Kyocera Scanner Pins KM-2560/3060

    Does anyone have a pair of Scanner Pins to fit the KM-2560/3060?

    There seems to be no p/n in the service manual Parts List.

    I have a request into Kyocera support, but do not know if that will turn up anything.

    http://hammondorganservice.com/downloads/images/ScannerPinImg.jpg

    Thank You
    Tags: km-2560/3060, kyocera, pins, scanner, support
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22698
      #2
      Re: Kyocera Scanner Pins KM-2560/3060

      I probably have a few around. Honestly I wouldn't bother. We transport machines 100 miles and more without the scanner locked. The only time the scanner has ever been damaged is if the copier comes loose from the side of the truck and tips over. (Don't do that.)

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • monarke4
          Trusted Tech

          Site Contributor
          100+ Posts
          • Oct 2018
          • 178
          #3
          Re: Kyocera Scanner Pins KM-2560/3060

          It will be covered with moving blankets, top half separated from the bottom (for which I can rent a van rather than at truck). It will also be strapped (but not too tightly) to the rails U-Haul provides.

          From the drawing and from what I saw on the machine no Saturday they look like partially threaded screws (probably metric) possibly 4mm?

          Since the Lift Plate Stopper(s) have an actual place in each tray to be saved, they are all there.

          I'd feel safer having them and using them. Send me a private message and let me know what I need to do (price and my shipping address).

          Thanks

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22698
              #4
              Re: Kyocera Scanner Pins KM-2560/3060

              They'll look something like this:

              3mm threads, 39mm long shoulder

              They are not intended to pull the scanner tight to the wall, just limit travel to less than a centimeter.
              I'll private message you. =^..^=

              Scanner Lock Screws.JPG
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • monarke4
                  Trusted Tech

                  Site Contributor
                  100+ Posts
                  • Oct 2018
                  • 178
                  #5
                  Re: Kyocera Scanner Pins KM-2560/3060

                  Originally posted by blackcat4866
                  They'll look something like this:

                  3mm threads, 39mm long shoulder

                  They are not intended to pull the scanner tight to the wall, just limit travel to less than a centimeter.
                  I'll private message you. =^..^=

                  [ATTACH=CONFIG]40863[/ATTACH]
                  As I looked at the machine, that is what I thought. If you were to tighten them too much, it would (one) pull the plastic of the cover in, and (two) possibly distort/damage the frame of the scanner assembly.

                    Comment

                    • GeneOR95
                      Trusted Tech

                      100+ Posts
                      • Feb 2018
                      • 161
                      #6
                      Re: Kyocera Scanner Pins KM-2560/3060

                      9 35968110 STOPPER WIRE ASS'Y SP found on page 53 of the parts list (FIG. 26 Options 3 & Tools)

                        Comment

                        • monarke4
                          Trusted Tech

                          Site Contributor
                          100+ Posts
                          • Oct 2018
                          • 178
                          #7
                          Re: Kyocera Scanner Pins KM-2560/3060

                          Originally posted by GeneOR95
                          9 35968110 STOPPER WIRE ASS'Y SP found on page 53 of the parts list (FIG. 26 Options 3 & Tools)
                          Looking at the service manual, the Page 1-5-25, Figure 1-5-45 it appears this item is to be snapped around the scanner wire pulleys. To be used when re-stringing the scanner cables.

                          http://www.hammondorganservice.com/downloads/images/Pg1.jpg

                          http://www.hammondorganservice.com/downloads/images/Pg2.jpg


                            Comment

                            Previous template Next
                            Working...