hello all technician well l have error code C6400 in tasklafa 181 ..all here fuse parts l controlled is good ..l enter service mode and making U163 but unfortunate any news ..pls help .
-
BEST TECHNICIAN . NICE PEOPLE . -
Re: Taskalfa 181
Do you know what a zero-cross error is?:
kyocera fs-1116
Oh, you do. Maybe you should read this thread again. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment