Copystar cs 2050

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Papo
    Technician
    • Oct 2008
    • 36
    #1

    Copystar cs 2050

    This problem on the machine goes into a please wait situacion never gives you a code but when I remove the feeder plug It reaches ready condition.

    When I connect the feeder It doesent work !

    Only the copier/printer portion works any Ideas fixes mods Updates?

    Dont no how to update the firmware on this thing any help would be apretiated!
    Tags: 2050, copystar, ect, mods, stuck
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23008
      #2
      You should try out the Search function on this forum. It's very handy.

      http://www.copytechnet.com/forums/ky...kids-play.html

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • copygirl
          Technician

          50+ Posts
          • Apr 2008
          • 75
          #3
          To upgrade the firmware you'll have to take the big square cover off the back. The slot for the compact flash is in the upper right on the side. You'll see it once you take the cover off. The only update which might help your feeder is a grounding wire to prevent noise from coming thru. I know we've had a few we had to do this on. I will send it to you.
          Ginger

            Comment

            • Papo
              Technician
              • Oct 2008
              • 36
              #4
              Do you mean I plug the Cf card into the cpu not the copier acses?

              [quote=copygirl;56175]To upgrade the firmware you'll have to take the big square cover off the back. The slot for the compact flash is in the upper right on the side. You'll see it once you take the cover off. The only update which might help your feeder is a grounding wire to prevent noise from coming thru. I know we've had a few we had to do this on. I will send it to you.[ can you send me this update info?]


              God bless...

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 23008
                  #5
                  Originally posted by blackcat4866
                  You should try out the Search function on this forum. It's very handy.

                  http://www.copytechnet.com/forums/ky...kids-play.html

                  =^..^=

                  Try clicking this link.
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...