Kyocra 3252ci line on drum

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Colin Borwick
    Technician
    • Sep 2014
    • 11
    #16
    Re: Kyocra 3252ci line on drum

    Originally posted by mga
    Are you sure you fitted a oem complete drum unit or did you rebuild?
    100℅ OEM

      Comment

      • mga
        Copier Technician

        Site Contributor
        1,000+ Posts
        • Dec 2010
        • 1393
        #17
        Re: Kyocra 3252ci line on drum

        Originally posted by Colin Borwick
        I will check out once again tomorrow just seems strange ive got two machines giving same problem Ive even spoken to other Kyocera technicians they just change the paper trays to landscape short term solution.
        I see a lot of these machines if you fitted oem complete new drum and dev units I can't see what else cause that problem changing paper to a4r isn't fixing problem I don't know any Kyocera engineers that would do that.
        Regards Mark

        FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

        RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

        https://copierservices.simdif.com

          Comment

          • mga
            Copier Technician

            Site Contributor
            1,000+ Posts
            • Dec 2010
            • 1393
            #18
            Re: Kyocra 3252ci line on drum

            Originally posted by Colin Borwick
            100℅ OEM
            I see if there's anything on Kyocera site in the morning good luck for now
            Regards Mark

            FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

            RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

            https://copierservices.simdif.com

              Comment

              • Phil B.
                Field Supervisor

                10,000+ Posts
                • Jul 2016
                • 22798
                #19
                Re: Kyocra 3252ci line on drum

                Originally posted by mga
                I see a lot of these machines if you fitted oem complete new drum and dev units I can't see what else cause that problem changing paper to a4r isn't fixing problem I don't know any Kyocera engineers that would do that.
                so true.. you are inviting a case for arcing to the drum.

                  Comment

                  • allan
                    RTFM!!

                    5,000+ Posts
                    • Apr 2010
                    • 5462
                    #20
                    Re: Kyocra 3252ci line on drum

                    Post a sample print.
                    Don't know this Kyo is it a mono component machine.

                    In the photo of the drum the one band looks polished off.
                    Could that be a raised mag brush due to damage or contamination on the mag roller.
                    Whatever

                      Comment

                      • Colin Borwick
                        Technician
                        • Sep 2014
                        • 11
                        #21
                        Re: Kyocra 3252ci line on drum

                        Originally posted by mga
                        I see if there's anything on Kyocera site in the morning good luck for now
                        Thanks million. I actually checked Kyocera sight today could see nothing in relation to my problem.

                          Comment

                          • blackcat4866
                            Master Of The Obvious

                            Site Contributor
                            10,000+ Posts
                            • Jul 2007
                            • 23009
                            #22
                            Re: Kyocra 3252ci line on drum

                            Originally posted by allan
                            Post a sample print.
                            Don't know this Kyo is it a mono component machine.

                            In the photo of the drum the one band looks polished off.
                            Could that be a raised mag brush due to damage or contamination on the mag roller.
                            The color machines are all dual component. Only the older monochrome MFPs and the monochrome printers are still monocomponent.
                            If you'd like a serious answer to your request:
                            1) demonstrate that you've read the manual
                            2) demonstrate that you made some attempt to fix it.
                            3) if you're going to ask about jams include the jam code.
                            4) if you're going to ask about an error code include the error code.
                            5) You are the person onsite. Only you can make observations.

                            blackcat: Master Of The Obvious =^..^=

                              Comment

                              • Colin Borwick
                                Technician
                                • Sep 2014
                                • 11
                                #23
                                Re: Kyocra 3252ci line on drum

                                Problem solved. When installing new drums and developer units Please guys only fully insert the units by pushing the units in from the connector end of the units Do no push the units with the release lever section as the units may not be inserted straight hence the reason for the marks on my drum.

                                Thanks guys for all you advise.

                                  Comment

                                  • BillyCarpenter
                                    Field Supervisor

                                    Site Contributor
                                    10,000+ Posts
                                    • Aug 2020
                                    • 16416
                                    #24
                                    Re: Kyocra 3252ci line on drum

                                    Originally posted by Colin Borwick
                                    Problem solved. When installing new drums and developer units Please guys only fully insert the units by pushing the units in from the connector end of the units Do no push the units with the release lever section as the units may not be inserted straight hence the reason for the marks on my drum.

                                    Thanks guys for all you advise.

                                    The rule of thumb for copiers is: "If it don't fit, don't force it."
                                    Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                                      Comment

                                      • tsbservice
                                        Field tech

                                        Site Contributor
                                        5,000+ Posts
                                        • May 2007
                                        • 8020
                                        #25
                                        Re: Kyocra 3252ci line on drum

                                        Originally posted by Colin Borwick
                                        Problem solved. When installing new drums and developer units Please guys only fully insert the units by pushing the units in from the connector end of the units Do no push the units with the release lever section as the units may not be inserted straight hence the reason for the marks on my drum.

                                        Thanks guys for all you advise.
                                        Isn't Kyocera SM tell how and where to push the units?
                                        A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                                        Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                                          Comment

                                          • callservice
                                            Technician
                                            • Sep 2011
                                            • 26
                                            #26
                                            Re: Kyocra 3252ci line on drum

                                            Originally posted by Colin Borwick
                                            Problem solved. When installing new drums and developer units Please guys only fully insert the units by pushing the units in from the connector end of the units Do no push the units with the release lever section as the units may not be inserted straight hence the reason for the marks on my drum.

                                            Thanks guys for all you advise.

                                            3252ci dv .jpg
                                            Your Dv has an issue.. see the image.. DV mag sleeve gone bad in the edge. it will affect the drum with arching .. Drum coating wiped of exactly opposite to this location. check it.

                                              Comment

                                              • mga
                                                Copier Technician

                                                Site Contributor
                                                1,000+ Posts
                                                • Dec 2010
                                                • 1393
                                                #27
                                                Re: Kyocra 3252ci line on drum

                                                Never had any problems when fitting these parts but I think it's always best to fit new oem parts first time.

                                                Well done Fault sorted.
                                                Regards Mark

                                                FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                                                RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                                                https://copierservices.simdif.com

                                                  Comment

                                                  • oneoldtech
                                                    Junior Member
                                                    • Feb 2018
                                                    • 2
                                                    #28
                                                    Re: Kyocra 3252ci line on drum

                                                    trying to find cure. transfer belt clean drive breaks. eatting drums and dv. set to koyoceera no answer yet

                                                      Comment

                                                      • rapo_tech
                                                        Trusted Tech

                                                        100+ Posts
                                                        • Feb 2019
                                                        • 114
                                                        #29
                                                        Re: Kyocra 3252ci line on drum

                                                        Originally posted by oneoldtech
                                                        trying to find cure. transfer belt clean drive breaks. eatting drums and dv. set to koyoceera no answer yet
                                                        New thread?
                                                        Grammatically correct sentences would also be helpful...

                                                          Comment

                                                          • Konicatech
                                                            Trusted Tech

                                                            100+ Posts
                                                            • Feb 2016
                                                            • 131
                                                            #30
                                                            Re: Kyocra 3252ci line on drum

                                                            Change the drum and K dev unit and your problem will be fixed. Its probably the dev unit that caused the problem.

                                                              Comment

                                                              Previous 1 2 3 template Next
                                                              Working...