Reset

[slimslob]

Re: Reset

So, pointing out that Phil B. insulted someone else and had a bad attitude is me having a bad attitude? Sounds like gaslighting to me.
I could care less about the rep power. I enjoy this site for the people who are polite and helpful and have knowledge that i don't.
The fact that both of you did that to my account is super petty. And the amount you did it by. Maybe you should focus yourselves on not abusing other people on this site. Like being polite to the guy who started the thread in the first place. And the other people who you insult. You guys are on some kind of ego trip. I'm out..

I didn't mention this before because I wasn't sure but you are starting to sound like a butt hurt liberal. As a result you have earned a spot on my ignore list. And posts total with 4 of them in this thread in 6 years you not very active here

[spw]

Re: Reset

Thanks for proving my point. Abuse......

[Phil B.]

Re: Reset

But this isn't helpfull either......

it's called following forum rules ... you just might want to brush up on them

Helpful not helpfull

[Phil B.]

Re: Reset

Thanks for proving my point. Abuse......

no it's called be a grown up and following rules...

something liberals rarely do I know but rules are rules and you can be removed for violating them or getting such bad rep points no one gives a damn what you have to say

[Phil B.]

Re: Reset

So, pointing out that Phil B. insulted someone else and had a bad attitude is me having a bad attitude? Sounds like gaslighting to me.
I could care less about the rep power. I enjoy this site for the people who are polite and helpful and have knowledge that i don't.
The fact that both of you did that to my account is super petty. And the amount you did it by. Maybe you should focus yourselves on not abusing other people on this site. Like being polite to the guy who started the thread in the first place. And the other people who you insult. You guys are on some kind of ego trip. I'm out..

it's called following RULES....

and to keep up the butthurt and whining shows just how petty you are... are you a man or a female? sounds like the latter to me.

your out? does that mean you are leaving for good? God I hope so.

[copier tech]

Re: Reset

it's called following RULES....

and to keep up the butthurt and whining shows just how petty you are... are you a man or a female? sounds like the latter to me.

your out? does that mean you are leaving for good? God I hope so.

Rules are made to be broken.

Talking of braking rules for all your firmware needs please visit us at the link below.

[tsbservice]

Re: Reset

There are a couple of ways to do this
Note this method will only work if the printer was set to dhcp.
With the device turned on plug it into an active network and give it a couple of minutes to get an ip address. Go to service mode 000 reports and print a network status. Put the ip address of the printer in a web browser and login to the printers rui as admin. Go to tcp-ip reset / initialize to factory defaults.

The ugly method
service mode > 21 memory clear reboot, now you have to be quick before papercut kicks in again, goto system / application / login / deactivate papercut. Do a final memory clear, reboot and papercut should be history.

With kyo there are no machine specific settings to put back and in your case you wanted it reset.

OP didn't find time/desire to respond if skynet valid advices are tried...

Rules are made to be broken.

Talking of braking rules for all your firmware needs please visit us at the link below.

besides why your sites have to be bumped in this thread?

[Phil B.]

Re: Reset

Rules are made to be broken.

Talking of braking rules for all your firmware needs please visit us at the link below.

hey bud I see no link

yup broken rules.. just look at the dimwit party

[copier tech]

Re: Reset

OP didn't find time/desire to respond if skynet valid advices are tried...



besides why your sites have to be bumped in this thread?

Free marketing dude that's why.

[copier tech]

Re: Reset

hey bud I see no link

yup broken rules.. just look at the dimwit party

Should you have missed it our link is in my signature. (or below this post now)

Printer & Copier Firmware - www.printerfirmware.co.uk

[tsbservice]

Re: Reset

Free marketing dude that's why.

Offtopic:

I see you asked for Canon machine system software maybe day ago, if I hook you up with this freely will you put the same software/firmware files on your site available to purchase?

No need to reply I know the answer...it's free business opportunity

[copier tech]

Re: Reset

Offtopic:

I see you asked for Canon machine system software maybe day ago, if I hook you up with this freely will you put the same software/firmware files on your site available to purchase?

No need to reply I know the answer...it's free business opportunity

Happy to reply.

Yes should you need this firmware drop us an email.

[slimslob]

Re: Reset

hey bud I see no link

yup broken rules.. just look at the dimwit party

It is in his signature line. When you got him to put it in the body of the post, that made the post one that can be and has been reported. Now if we had a paid advertiser like Just Manuals used to be, then the signature line could also be reported.

[copier tech]

Re: Reset

It is in his signature line. When you got him to put it in the body of the post, that made the post one that can be and has been reported. Now if we had a paid advertiser like Just Manuals used to be, then the signature line could also be reported.

We at printerfirmware.co.uk appreciate your support Slim.

[tsbservice]

Re: Reset

Offtopic:

I see you asked for Canon machine system software maybe day ago, if I hook you up with this freely will you put the same software/firmware files on your site available to purchase?

No need to reply I know the answer...it's free business opportunity

Happy to reply.

Yes should you need this firmware drop us an email.

Yep still no need to reply