Kyocera covers needed.

[MrPrinter]

I am looking to buy exit switch assemblies, bump stop and other covers that are removed when adding a bridge unit to Kyocera A3 copiers. We buy a lot of off lease equipment and always take the finishers off when we receive them and need these pieces if the machine previously had a finisher. I am wanting to use on 52 and 53 series machines. To my knowledge these parts are the same on the newer 54 series machines as well.
I will pay well for these parts. If you want to save them when setting up new machines I will pay you well for them. Please Private message me if you have these available or can collect them for me and I will send you my price.

[Samanator]

Where are you locate?

[MrPrinter]

I am in Ohio, but will provide a UPS label as long as you are in the United States

[dalewb74]

what model?

[MrPrinter]

I need the parts to fit onto 3252 and 3253 models. But to my knowledge the 54 series use the same parts and they are removed when adding a finisher.
1. small cover on left side
2. exit switch assembly
3. cover in rear right corner
4. paper stop / ramp

[Scott]

I am looking to buy exit switch assemblies, bump stop and other covers that are removed when adding a bridge unit to Kyocera A3 copiers. We buy a lot of off lease equipment and always take the finishers off when we receive them and need these pieces if the machine previously had a finisher. I am wanting to use on 52 and 53 series machines. To my knowledge these parts are the same on the newer 54 series machines as well.
I will pay well for these parts. If you want to save them when setting up new machines I will pay you well for them. Please Private message me if you have these available or can collect them for me and I will send you my price.

Will save mine going forward

[MrPrinter]

Thanks, I was able to find some for now. we are a fairly small dealer so we dont do a huge ton, but go ahead and PM me once you have a few sets.