kyocera ecosys m3655idn

[cla65]

Good evening, I have a Kyocera Ecosys M3655IDN on the field, it creaks insistently during the heating phase and during the printing phase.
I lubricated all the bushings, but without solving the problem.
do you have any suggestions?
Thank you

[copier tech]

Good evening, I have a Kyocera Ecosys M3655IDN on the field, it creaks insistently during the heating phase and during the printing phase.
I lubricated all the bushings, but without solving the problem.
do you have any suggestions?
Thank you

No much you can do really except fit a new fuser unit.

[BBM]

Did you lubricate the duplx white pulleys

[ntbann]

Ive also had the drum drive collar squeak in the drum unit itself.

[AlexandruMG]

Hi mate,

The noise could be coming from the transport rollers on the rear door of the equipment, the rollers in the exit unit, or even from the imaging unit if the noise occurs with every print. Don't forget to lubricate the bushings from rear door, and if the issue is with the imaging unit, you should check the waste toner transport auger. There might be solidified toner causing the noise.
Tell us how many prints are made on this mfp.

Cheers,
Alex

[cla65]

Ciao, ho già fatto tutte le cose che mi hai suggerito. Ho sostituito l'unità fusore e anche il DV completo e cambiato la porta posteriore. Hai altre idee? Grazie e cordiali saluti

[AlexandruMG]

Try to make a video and postit here. Maybe this way we can help you more.

[Lunatech]

Have you replaced the photo conductive unit?

Hai sostituito l'unità fotoconduttiva?