TA 2552ci loss of color

[BillyCarpenter]

Re: TA 2552ci loss of color

Perhaps you are not understanding me, let me clarify (I am only trying to get facts which may not be properly understood here)

I am asking if toner is pre-mixed with carrier as has been asserted by Dallas, TX training material (below)

All (kyo-console) developers are dual component. The only difference is hybrid DV 'point of contact' uses mono component. Saying 'all Alphard used (anything) instead of dual component' is not accurate.

Alphard was CASS only (hybrid DV) because simple (1-roller) Dual component system was not introduced into the 2 lowest speed models of Alphard, but is now.

SO since construction of hybrid developers has not changed since Alphard, are you saying that toner composition is different for later hybrid models and does not comply to information below:

[ATTACH=CONFIG]50251[/ATTACH]

Because developers now eject waste constantly (with DV drive) then if no additional carrier is ever supplied then DV must retain all initial carrier on MAG roller?

I hope you understand this is an important point of clarification.

If I'm understanding correctly, DV comes premixed with toner when the DV unit is new. As the machine is used, new carrier is introdced into the DV unit (to keep it fresh) via toner cartridge and a small amount of carrier is discharged thru waste toner to ensure the mixture is optimal?

[blackcat4866]

Re: TA 2552ci loss of color

If I'm understanding correctly, DV comes premixed with toner when the DV unit is new. As the machine is used, new carrier is introdced into the DV unit (to keep it fresh) via toner cartridge and a small amount of carrier is discharged thru waste toner to ensure the mixture is optimal?

True. That's why the new developing units have an outlet to release developer to the waste bottle above a certain level.
=^..^=

[BillyCarpenter]

Re: TA 2552ci loss of color

True. That's why the new developing units have an outlet to release developer to the waste bottle above a certain level.
=^..^=

Some of the techs get very technical about the inter-workings of a machine and I love reading it because I don't have access to the information. I hang on every word. Keep it coming, guys.

[tsbservice]

Re: TA 2552ci loss of color

If I'm understanding correctly, DV comes premixed with toner when the DV unit is new. As the machine is used, new carrier is introdced into the DV unit (to keep it fresh) via toner cartridge and a small amount of carrier is discharged thru waste toner to ensure the mixture is optimal?

This is solution. I hated when doing dev change every now and then. Plus stripped gears and leaking seals/bushings seized bearings leaving no mercy on mixer shafts...what a torture!
Developer refreshing from new toner cartridge and discharge of old developer into WTB...Genious