kyocera 4500i c2500 error

[pinkyman]

hello everybody i've kyocera 4500i and it gives error code C2500 ..
manual describe this code (Transfer motor error
After transfer motor is driven, the ready signal does not turn to L within 2 s. After transfer motor is stabilized, the ready signal is at the H level for 1 s continuously)
what is the Solution

[tmaged]

Remove the transfer belt unit. There is a worm gear that drives the belt in & out. I believe the clip comes off. It's pretty east to see once you take it apart.

[pinkyman]

Remove the transfer belt unit. There is a worm gear that drives the belt in & out. I believe the clip comes off. It's pretty east to see once you take it apart.

thnx bro i will try it

[blackcat4866]

Also make sure that you have no bent pins on the transfer belt connector, and that the connector is fully inserted.