FS-1135MFP fuser

[copyman]

When searching internet for a new fuser sometimes the FK-171 comes up, can this be used in place of the FK-170 (302LZ93050) which is correct part # for the FS-1135MFP?

Also the FK-170 seems to be out of stock. My suppliers sell fuser kits to rebuild as a last resort, does rebuilding this fuser work ok?

Thanks in advance

[ihatefinishers13]

When searching internet for a new fuser sometimes the FK-171 comes up, can this be used in place of the FK-170 (302LZ93050) which is correct part # for the FS-1135MFP?

Also the FK-170 seems to be out of stock. My suppliers sell fuser kits to rebuild as a last resort, does rebuilding this fuser work ok?

Thanks in advance

That machine has been End of Life for a few years now... I've only ever replaced it, as that's the only option from Kyocera.

[kuby]

Amazon says they have it in stock.

[copykat93]

I believe I may have this fuser assy. In stock... I will check in the morning and let you know.

[copyman]

I believe I may have this fuser assy. In stock... I will check in the morning and let you know.

Hi copykat, thanks for the offer but I found one. Really appreciate the reply. Let me know if you ever need anything with Kon/Min. Take care