Kyocera - Toner level

[Keppler]

Hi all,

Does anyone know which MIB shows the printer's toner level?

Thanks

[ThisPete]

A clue on which device would help, does the 'status page' printout not show this?

[Keppler]

A clue on which device would help, does the 'status page' printout not show this?

Yes, the status page shows this information.

I have 10 printers and would like to view the toner levels of all printers simultaneously.
Kyocera provides Net Viewer software, but only for Microsoft Windows.

That's why I would like to get the information from all printers simultaneously, via SNMP.
Thanks

[ATM]

Do you need that info for specific monitoring software?

[Keppler]

Do you need that info for specific monitoring software?

Hi,
Thank you for your feedback.

I found a website that tells you the OIDs for toner levels.

https://documentation.n-able.com/remote-management/userguide/Content/additional_oids.htm

There are two OIDs:
Maximum toner level (1.3.6.1.2.1.43.11.1.1.8.1.1)
Current toner level (1.3.6.1.2.1.43.11.1.1.9.1.1)
Using snmpget, I took the values and converted them to percentages.

snmpget -v2c -c public 10.10.31.30 1.3.6.1.2.1.43.11.1.1.8.1.1 (return SNMPv2-SMI::mib-2.43.11.1.1.8.1.1 = INTEGER: 21000)
snmpget -v2c -c public 10.10.31.30 1.3.6.1.2.1.43.11.1.1.9.1.1 (return SNMPv2-SMI::mib-2.43.11.1.1.9.1.1 = INTEGER: 19740)
Toner level is: 19740 / 21000 * 100 = 94%

Then I created the table below.

Thank you very much