M3655 mylar for ADF

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dark Helmet
    Senior Tech

    Site Contributor
    500+ Posts
    • May 2009
    • 847
    #1

    M3655 mylar for ADF

    Howdy folks,

    We have a ton of M3655's out there and for quite a while we were replacing ADF frames like crazy due to the oil weakening the frame. We replace the frame and put the oil sheet on but i can't find the mylars that sit on the frame shown in the pic below.
    Does anyone have a part number for these? Most of the time we can peel the old ones off but some times the tape rips and we are taking another feeder apart to get a set of mylars.

    image.png
    Evil will always triumph because good is dumb.
    Tags: None
    • tmaged
      Owner/Service Manager

      Site Contributor
      1,000+ Posts
      • Oct 2008
      • 1885
      #2
      303R424260 & 303R424270
      Hope that helps !
      -Tony
      www.dtios.com
      Become a fan on Facebook
        👍 2

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23008
          #3
          I've been making my own mylar guides forever. All you need is mylar sheet of the desired thickness and rigidity, and two sided tape.

          Trace the shape, cut out the piece, apply two sided tape, and stick. It's the mylars that go on backorder, and I get tired of waiting.
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=
            👍 2

            Comment

            Previous template Next
            Working...