Kyocera KM 4004i

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • partly retired
    Technician
    • Oct 2019
    • 31
    #1

    Kyocera KM 4004i

    I'm trying to retire but want to help a decades long customer with her battle. They purchased a new KM 4004i and I'd like to know if there is a setting to make the bypass tray default to 8x11 paper and at the same time feed the df 8 x 11 also without going thru lots of steps? Apparently the techs and sales people have told her that can't be done. In the old days a user could put paper in the bypass, the switch gets activated and the operation screen asks what size paper is in tray but she says not so with her machine.

    Also they say it takes a long time once machine is in standby mode to come to ready state. I'm assuming machine is set to fuser OFF? Could you supply the code that I could adjust that say from 0 to whatever customer wants? And is it still 10871087 to enter service code?

    Any help I can get is appreciated and the do as well. Thanks
    Tags: bypass, paper, time, tray
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22973
      #2
      Re: Kyocera KM 4004i

      if it's 8"x11" you'll have to set up a custom paper size. If it's Letter 8 1/2" x 11", the MP tray can automatically identify standard sizes like COM10, STMT-R, LTR-R, LTR, LGL & LGR. All you have do is enable Auto Inch Size Detection for that tray.

      It's in the System Menu, or find the Operators Guide here:

      Product Support & Downloads | Kyocera Document Solutions America

      =^..^=
      Attached Files
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • partly retired
          Technician
          • Oct 2019
          • 31
          #3
          Re: Kyocera KM 4004i

          Originally posted by blackcat4866
          if it's 8"x11" you'll have to set up a custom paper size. If it's Letter 8 1/2" x 11", the MP tray can automatically identify standard sizes like COM10, STMT-R, LTR-R, LTR, LGL & LGR. All you have do is enable Auto Inch Size Detection for that tray.

          It's in the System Menu, or find the Operators Guide here:

          Product Support & Downloads | Kyocera Document Solutions America

          =^..^=


          Thanks for your time.

            Comment

            Previous template Next
            Working...