Kyocera MA4000 series models

[copykat93]

Hi guys... Does anyone have any positive or negative feed back on the replacement models for the Kyocera M2040/M2540/M2640 machines?.. The new MA4000wfx & MA4000wifx or MA4000x machines, are they any better in the fuser ares, what are the drum unit & toner yields like & is it a better small box than the previous?
Thanks

[Ropariva]

Also keen to know. 30k from a fuser is rubbish. Noted it has a different part number, so fingers crossed they have engineered the belt slippage out of it.

[Ghostlover34]

Hello brother, I only changed the kit once, other than that it did not cause any problems or malfunctions.

kyocera.png

[Ropariva]

Hello brother, I only changed the kit once, other than that it did not cause any problems or malfunctions.

kyocera.png

That’s the next engine up. Different machine to the 4000 series

[copykat93]

Yeah... Guys..... I'm looking for feedback on the ma4000 series machines... Fuser life, drum life and overall reliability compared to the m2040-2540-2640?

Hated the fuser life and drum life was always half of stated yields.

[copykat93]

Nobody has sold any of the new MA4000 series machines yet? Hard to believe

[tmaged]

If you search on here, Kyo_OEM said the fusers have been totally redesigned for the new model. They will release the 7th revision for the old models when back stock is used up. The fusers were the only weak point. We have some of the new models out, but none with enough images yet to form an opinion.

[tech07]

We have about 100 in the field. So far good. There was a toner clogging issue that was fixed with firmware. I haven't had to replace any parts in any of these in a couple of months. Maybe longer