Kyocera 9001i drum cover assembly

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jordanboi5
    Technician
    • Nov 2021
    • 18
    #1

    Kyocera 9001i drum cover assembly

    Hello guys,
    Part number is 302NJ94270
    Somehow this part broke and I recently tried replacing it.
    Made sure it was properly lined up but notice on the left side there was nothing holding onto it.

    I took two pictures to see if this help
    Amazon Photos

    Thank you guys in advanced.
    Tags: 9001i, left, part
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22973
      #2
      Re: Kyocera 9001i drum cover assembly

      You're missing a light gray "pin" with a snap in the end to retain it. It looks like this:
      It does not appear separately in the parts manual.

      Pin.jpg

      =^..^=

      Edit: It looks EXACTLY like this, LOL:
      Pin1.jpg
      Last edited by blackcat4866; 04-01-2022, 10:04 PM.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • jordanboi5
          Technician
          • Nov 2021
          • 18
          #3
          Re: Kyocera 9001i drum cover assembly

          Wait, so it's suppose to come with the part that we ordered?
          WTH!


          Originally posted by blackcat4866
          You're missing a light gray "pin" with a snap in the end to retain it. It looks like this:
          It does not appear separately in the parts manual.

          [ATTACH=CONFIG]52837[/ATTACH]

          =^..^=

          Edit: It looks EXACTLY like this, LOL:
          [ATTACH=CONFIG]52838[/ATTACH]

            Comment

            • jordanboi5
              Technician
              • Nov 2021
              • 18
              #4
              Re: Kyocera 9001i drum cover assembly

              Correction, not too sure how to edit the title, but it was a 9002i

              We were able to order the part, man such a pain in the ass lol.

              Had another issue and it actually messed with the secondary transfer belt
              Shifted the belt and caused it to crumble.

              So we have to update the firmware and do some sort of measurement.
              I'll upload the instruction with the new transfer belt.

                Comment

                • sparkycivic
                  Trusted Tech

                  250+ Posts
                  • Apr 2017
                  • 348
                  #5
                  Re: Kyocera 9001i drum cover assembly

                  Originally posted by jordanboi5
                  Correction, not too sure how to edit the title, but it was a 9002i

                  it actually messed with the secondary transfer belt
                  Shifted the belt and caused it to crumble.

                  .
                  this didn't cause the transfer belt to shift: the new yellow-dot material belts do that all on their own and need alignment using shims.

                    Comment

                    • PrintWhisperer
                      Trusted Tech

                      250+ Posts
                      • Feb 2018
                      • 454
                      #6
                      Re: Kyocera 9001i drum cover assembly

                      Here is the bulletin for the TX belt alignment, hopefully you didn't toss your spacers:
                      GENENTB110.pdf
                      "Being ignorant is not so much a shame, as being unwilling to learn" - Benjamin Franklin

                        Comment

                        Previous template Next
                        Working...