? on copystar 1500

[jpcopy]

I have a copystar 1500 with 34K on it and the copies are light with lighter streaks running thru the page. after inspecting the process unit, I can see the striping on magroller. The toner cartridge feels empty but no toner light on. could it be that it only needs toner. I don't keep that toner on hand so though I ask before ording.
Thanks for any responce
jp

[charly]

1. that is discarded first optica,
Take a page in the state sim 000
2.if the copy are ligth clean the lsu
3.if the copy is not light ,clean the optical system
4.verifies if toner cartridge is original

[raym]

clean your doctor blade on dev. unit.

ray

[vikingmita]

5. p.u is broken. literally. known to happen, springs and stuff flying off, i.e. too much gap between drum/mag.

[jpcopy]

Thanks guys I think I'll need the toner. p.u. doesn't appear broken. took hopper on toner part of p.u. apart and cleaning the mag may be an idea
I don't have the codes for internal print unless it is in intravia's and it could be generic toner (no copystar on cartridge) but it is made in japan
Thanks
jp

[jpcopy]

put new toner in and copies became OK. question Does the exposure lamp stay on all the time on this machine?

[charly]

yes

[jpcopy]

thanks
jp

[jaime]

Press and hold the reset button 5 seconds and move to energy-saving mode. The lamp is shut