raskalfa 4501i

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gab
    Senior Tech
    • Aug 2015
    • 656

    #1

    raskalfa 4501i

    The control panel is of . No light on any ley , nothing. When turn on copier scaner flashes etc .
    Obviously the problem is on panel. Any idea where exacly?
  • sparkycivic
    Trusted Tech

    250+ Posts
    • Apr 2017
    • 348

    #2
    Re: raskalfa 4501i

    does the rest of the device have any life? can you browse "command center"?

    Comment

    • Gab
      Senior Tech
      • Aug 2015
      • 656

      #3
      Re: raskalfa 4501i

      Originally posted by sparkycivic
      does the rest of the device have any life? can you browse "command center"?
      Yes the rest of the machine looks fine. Lamp flashes at the strt up , motors and ventilators work too.

      Comment

      • KYO_OEM
        Senior Tech

        500+ Posts
        • Aug 2011
        • 685

        #4
        Re: raskalfa 4501i

        at first i would reconnect memory modul on main pwb (not firmware modul)
        2nd step follow my leaflet for our field technicians
        Attached Files

        Comment

        • BillyCarpenter
          Field Supervisor

          Site Contributor
          VIP Subscriber
          10,000+ Posts
          • Aug 2020
          • 16308

          #5
          Re: raskalfa 4501i

          Originally posted by KYO_OEM
          at first i would reconnect memory modul on main pwb (not firmware modul)
          2nd step follow my leaflet for our field technicians
          Nice guide. It's now part of my troubleshooting arsenol. Thanks.
          Adversity temporarily visits a strong man but stays with the weak for a lifetime.

          Comment

          Working...