taskalfa 5500

[Gab]

Image is light about 4cm at one side in the direction of paper move. Any idea?

[Samanator]

Re: taskalfa 5500

A sample would be most helpful

[BillyCarpenter]

Re: taskalfa 5500

Need more info. Do you have the same problem when printing and copying?

Also, what have you done to try to correct the problem?

[Gab]

Re: taskalfa 5500

Need more info. Do you have the same problem when printing and copying?

Also, what have you done to try to correct the problem?

I am afraid i can;t give a sample because this a problem of a colegue from an other city. He Performed drum de humidity, developer initialazation and calibration. cleaned separation roller.

[tonerleak]

Re: taskalfa 5500

Check the transfer belt, they sometimes shift and cause blank/light areas, also check the charge roller, they are cleanable ( damp lint-free cloth) or if it's in bad shape change it if you can. Also check the developer unit , the dev roller gets worn and causes quality issues. Hope this helps!

[ntbann]

Re: taskalfa 5500

Could be dirty polygon mirror tips.