Hoping for a quick answer on fuser compatibility M3540 and M3645

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • campy
    Trusted Tech

    250+ Posts
    • May 2012
    • 315
    #1

    Hoping for a quick answer on fuser compatibility M3540 and M3645

    I have a M3540idn that needs a fuser FK-3100. I have a M3645idn but that uses a FK-3130. On the older FS1135 type copiers the fuser was the same as other models but you had to swap the exit sensor cable over. Would the 3100 and 3130 have the same set up?
    Thanks
    Tags: fuser, models, sensor, set
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22973
      #2
      Re: Hoping for a quick answer on fuser compatibility M3540 and M3645

      The photo alone tells me that they are significantly different in shape. I don't expect that it would work. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • campy
          Trusted Tech

          250+ Posts
          • May 2012
          • 315
          #3
          Re: Hoping for a quick answer on fuser compatibility M3540 and M3645

          Ya your right, there not even close. I wonder if the upper roller is the same.

            Comment

            Previous template Next
            Working...