If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello all technician ..l have kyocera km1635 and hi affiched code error C300 please can you healpe me ...also l need the service manual of this copiers ..thx advance
zaza,
Unfortunately there is no C300 or C3000 code. You might to recheck that error code.
You might be getting a C3100, C3200, C3300. If I were you I would be hoping for the C3100 or C3200.
C3100: Scanner home position error
C3200: Exposure lamp intensity error
C3300: White level shading error
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Sounds like you were copying a book and catching the scanner lamp assembly. You may want to take the glass off and make sure your lens unit moves freely.
tell us what is going on with the copier and then tell us the error code... sorry... I just don't believe in helping someone shoot themself in the foot without just cause
Sad To Say I Don't Have a Life
I do this stuff on the weekends too
tell us what is going on with the copier and then tell us the error code... sorry... I just don't believe in helping someone shoot themself in the foot without just cause
hello all technician and thank you very much for your technical assistance ..well l find the problems for this kyocera km 1635 ...realy it's very esay to repared this copiers ..thx advance ...
Hello all technician ..l have kyocera km1635 and hi affiched code error C300 please can you healpe me ...also l need the service manual of this copiers ..thx advance
hi there buddy! this error code is not in the list of error codes but if i am not mistaken i encounter this one. replace the waste toner bottle sensor, this black sensor on the left side of the bottle.
Comment