7002i with an intermittent C-7130

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Necrocannibal
    Trusted Tech

    100+ Posts
    • May 2008
    • 212

    #1

    [Error Code] 7002i with an intermittent C-7130

    Never had this code one of these before. We swapped the developer hoping it was something in that but that isn't it. I don't think it is a motor issue as those seem to spin ok. Do these have issues with compacting toner or is there something else going on with it?
  • darry1322
    Senior Tech

    Site Contributor
    500+ Posts
    • Oct 2010
    • 817

    #2
    Re: 7002i with an intermittent C-7130

    C-7130 or C-7301?

    The C7301 is likely the toner hopper motor sensor is filled with loose toner. They can get dirty and need to be cleaned. Easy to get to.

    The C7130 I don't see listed in my service manual.

    Comment

    • Necrocannibal
      Trusted Tech

      100+ Posts
      • May 2008
      • 212

      #3
      Re: 7002i with an intermittent C-7130

      Originally posted by darry1322
      C-7130 or C-7301?

      The C7301 is likely the toner hopper motor sensor is filled with loose toner. They can get dirty and need to be cleaned. Easy to get to.

      The C7130 I don't see listed in my service manual.

      Oops, my brain got ahead of my fingers, it is a 7301. We got it to go away by taking that apart and cleaning it all out and I ordered a new one.

      Comment

      Working...