firmware 2.20D

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • IKy
    Technician
    • Apr 2008
    • 19

    #1

    firmware 2.20D

    If anyone can help with 2.20d, I have only 2.20C and urgently need new one
    Last edited by IKy; 08-09-2009, 06:25 PM.
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    For what model? I can get it, but it won't be free.

    Comment

    • IKy
      Technician
      • Apr 2008
      • 19

      #3
      Originally posted by manuals4you
      For what model? I can get it, but it won't be free.
      are you colleague or merchant? it's for 3050/5050. As i know this firmware has been announced, but not available yet. other way i would have got it with no help.
      Maybe anyone can help with old version 2.05? it can be useful too.

      Comment

      • JSC
        Gimp

        500+ Posts
        • Dec 2006
        • 618

        #4
        Latest version is v2.40
        Attached Files
        The gene pool could use a little chlorine.

        Comment

        • IKy
          Technician
          • Apr 2008
          • 19

          #5
          Originally posted by JSC
          Latest version is v2.40
          thanks, but can you upload it some where and give me a link

          Comment

          • IKy
            Technician
            • Apr 2008
            • 19

            #6
            Originally posted by JSC
            Latest version is v2.40
            thanks a lot I have just found 2.40

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 23006

              #7
              If you're using the ScanFile Utility do not load version 2.40. Your scanning will stop working. The previous version is 2.20D 03-09-09, like you said.
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

              Comment

              • JSC
                Gimp

                500+ Posts
                • Dec 2006
                • 618

                #8
                Originally posted by blackcat4866
                If you're using the ScanFile Utility do not load version 2.40. Your scanning will stop working. The previous version is 2.20D 03-09-09, like you said.

                I didn't know that........ does Kyocera know or have you just found out when you upgraded the firmware?
                The gene pool could use a little chlorine.

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 23006

                  #9
                  This topic came up on another forum just two days ago, confirmed by two other Kyocera techs. I personally have not experienced the symptom. I also stopped upgrading to 2.40. Kyocera is very likely watching this other forum, so it's very likely that they know.
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                  Comment

                  • JSC
                    Gimp

                    500+ Posts
                    • Dec 2006
                    • 618

                    #10
                    Thanks for the info.
                    The gene pool could use a little chlorine.

                    Comment

                    • Craigdumass
                      Technician

                      50+ Posts
                      • Jun 2009
                      • 61

                      #11
                      I have downloaded the 2.40 and it works with the new scan to file utility.

                      Comment

                      • imatrix

                        #12
                        Hi guys,

                        Can someone please tell me where to get latest firmware for KM-3050?

                        Thanks,

                        Comment

                        • nzcowboys
                          Technician
                          • Jun 2008
                          • 12

                          #13
                          Toners4you post above
                          This Forum is for helping fellow Techs with issues.
                          Not for making a quick Buck.
                          Sell your service elsewhere!
                          Last edited by nzcowboys; 10-01-2009, 12:17 AM. Reason: Add details

                          Comment

                          • imatrix

                            #14
                            Originally posted by nzcowboys
                            This Forum is for helping fellow Techs with issues.
                            Not for making a quick Buck.
                            Sell your service elsewhere!
                            stop being a smart-ass here, I just wanna upgrade my km-3050 in the office. I make no dam out of it, excepting putting more of my time into it.

                            Comment

                            • nzcowboys
                              Technician
                              • Jun 2008
                              • 12

                              #15
                              Sorry, this post was directed at Toners4you earlier in the posts trying to sell firmware. I don't feel this is the place to be selling free firmware?

                              Sorry for any offence.

                              Comment

                              Working...