If anyone can help with 2.20d, I have only 2.20C and urgently need new one
firmware 2.20D
Collapse
X
-
-
are you colleague or merchant? it's for 3050/5050. As i know this firmware has been announced, but not available yet. other way i would have got it with no help.
Maybe anyone can help with old version 2.05? it can be useful too.Comment
-
Latest version is v2.40Attached FilesThe gene pool could use a little chlorine.Comment
-
If you're using the ScanFile Utility do not load version 2.40. Your scanning will stop working. The previous version is 2.20D 03-09-09, like you said.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
The gene pool could use a little chlorine.Comment
-
This topic came up on another forum just two days ago, confirmed by two other Kyocera techs. I personally have not experienced the symptom. I also stopped upgrading to 2.40. Kyocera is very likely watching this other forum, so it's very likely that they know.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
-
imatrix
-
imatrix
Comment
Comment