There has been some discussion here on the codes & adjustments that need run after updating firmware. I put 6.3 on some machines today & U464 has changed. You no longer have all under the AC Calibration. You have to turn them all on one at a time. They've also add a high altitude button in there.
-
-
Interesting! I downloaded it, but haven't loaded it to any machines yet.
After my recent experiences with the CF249 I'm cautious.If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Comment