Copystar 2550

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • techman
    Technician
    • Dec 2007
    • 49
    #16
    same problem

    I had a cs-2550 do the same thing i tried replacing the tranfer roller and was still getting the white lines after 20 to 25 copies so i pulled out all the pm units and found that the developer had the same marking s on them i replaced the developer and havent had a problem since.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22973
        #17
        Not that I don't believe you, but this is more commonly caused by the developing unit. A drum problem would produce a repetetive flaw that you could measure the distance between occurances. A developing issue can be fairly random, inconsistent, and definitely affected by humidity.
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

          Comment

          Previous 1 2 template Next
          Working...