kyocera km 1500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • HaSSaN010
    • May 2025
    #1

    kyocera km 1500

    hello
    i have km 1500 code error c-6 400
    or 400 c-6

    How do I fix wrong.
    Is there a program, how to go there
    I really appreciate your help me ,,..,,
    Tags: 1500, act, clr, dirty, kyocera, power supply, qualified, rolle, wrong
    • zaza
      MECANOGRAPHE

      1,000+ Posts
      • Mar 2008
      • 1095
      #2
      more information ..please ...

      Originally posted by HaSSaN010
      hello
      i have km 1500 code error c-6 400
      or 400 c-6

      How do I fix wrong.
      Is there a program, how to go there
      I really appreciate your help me ,,..,,
      hello friend ..well in km 1500 they not have the code error c-6 400 or 400 c-6 ...please to be clear ...because it have only ..c6400..so you can sure for this code error ...if you need more explain contacted me from my mail ...mecanopharme@hotmail.fr ...l can healpe you my friend ..salam ...
      BEST TECHNICIAN . NICE PEOPLE .

        Comment

        • zaza
          MECANOGRAPHE

          1,000+ Posts
          • Mar 2008
          • 1095
          #3
          more information ..please ...

          Originally posted by HaSSaN010
          hello
          i have km 1500 code error c-6 400
          or 400 c-6

          How do I fix wrong.
          Is there a program, how to go there
          I really appreciate your help me ,,..,,
          hello friend ..well in km 1500 they not have the code error c-6 400 or 400 c-6 ...please to be clear ...because it have only ..c6400..so you can sure for this code error ...if you need more explain contacted me from my mail ...mecanopharme@hotmail.fr ...l can healpe you my friend ..salam ...
          BEST TECHNICIAN . NICE PEOPLE .

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22927
              #4
              C6400 is a Zero-Cross Error. That means that the machine's power supply has detected a poor ground that interferes with the machines heat lamp control circuits. You'll need to do two things.

              1) Contact a qualified electrician to resolve your dirty AC power.
              2) Reset the error in simulation 163. This can be found in the manual.

              Good luck. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • happicopy
                  Technician
                  • Jan 2010
                  • 51
                  #5
                  press stop/clear,print , light, stop. 000 will appear Enter '163' using the up/down keys n the counter key then press print key CLR will appear press print key twice then --- will appears, machine will reset it self wait for a while. you 'may' have a bad heater lamp if code reappears or you have defective thermistor and bad worn out fuser roller

                    Comment

                    Previous template Next
                    Working...