i have kyocera mita km2530. after i copy more than a hundred copy the next copy to print is waving. please helt. thank you in advance.
-
-
I'd like to see that scan also. It sounds like a laser to me, too. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
ok sir, i will prepared a scan copy. but do you think its from LSU even that for example i copy 1 original let say 500 pieces. so it will only scan once and after a few copy or hundreds the wave will be shown and the wave is different with other pages.Comment
-
Yes, that makes sense. The optical scanner only scans the single original once, but the LSU must write the image for each printed page. The longer it runs the more likely that the polygon mirror motor speed could become unstable, distorting the resulting image. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment