KM6030 Tech Reset

[Guest]

Have just purchased 2 second hand KM6030's. and they are password locked. Can someone please let me know what the machine reset code is so I can start reconfiguring...

[marc]

Reset

If you want to reset push the default setting at the control panel *
then go to management at the display the access code could be 6000
after you in turn off management after that close this screen now you good to go
good luck!!!!

[marc]

Accessing the Job Accounting Screen
Set up job accounting from the Job Accounting screen. Follow these steps to access the Job
Accounting screen.
1 Press the System Menu/Counter key.
2 Press [Job Accounting].
3 Use the numeric keys to enter the
four-digit management code. By default,
the management code is 6000 for the 60
. Accounting screen will
be displayed.
. Turn job accounting on or off as necessary.
2 Select [On] or [Off].
3 Press [Close].
4 Press [End].
When you select [On], the screen for the department ID-code entry is displayed.
When you select [Off], the [Basic] screen is displayed.
Setting Description
On Job accounting is activated.
Off Job accounting is deactivated.
Close
Each Mgt.
T Register/Sett. Job Accountg
Management Job Accntg
On

[ABIS]

Am off to give it a go. Thanks so much ... will let you know if it works!

[ABIS]

Hi Marc,
Unfortunately it did not like the 6000 code. Can't get it happening. If you have any other ideas would be grateful for them.

[marc]

Abis, try this 6482
goo luck!!

[heera]

Using 10871087 maintnence mode, U20 intialize memory all passwords will get reset, if you are not able to reset 6000.

[marc]

Sim 20

If you execute the simulation 20 don't forget change the simulation 252 back to inch
simulation 20 change the setting to Europe type