Congratulations! =^..^=
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
TASKalfa with Bizhub 451 Color table
Unzip the attached 2 file to the root of a USB stick and update firmware. Make sure no other files are on the stick. To go back to "No Color Table" Just update firmware as normal. Make sure you have current firmware done before changing the color table. This is for a BizHub 451 color table.Comment
-
Re: taskalfa 250ci colour issues
Hi
Can anyone tell me what the settings are, that have to be changed if the prints have more than 15% coverage on the page?
Thnks in advanceComment
-
Re: taskalfa 250ci colour issues
Simulation U486 > select Mode 2If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: taskalfa 250ci colour issues
Thank you very muchComment
Comment