dc 2254 Mita copier I need a scan lamp or place to buy one.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Simons
    Trusted Tech
    • Jun 2008
    • 490
    #1

    [CQ] dc 2254 Mita copier I need a scan lamp or place to buy one.

    The scan lamp is out. seems to want to copy with a flashlight.

    Can someone get me a part number for this lamp? I am having trouble locating one. Then I need to buy a lamp.

    thanks
    Tags: 225, 470, bad, copier, copy, exposure, km6500, km8030, kmc3225, kmc3232, kyocera, kyocera mita, lamp, mita, number, one, part, part number, parts, roller, sca, scan, scanner, trouble
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22932
      #2
      Kyocera Mita DC2285 Lamp (L3470)

      Part number: 72168020
      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • zaza
          MECANOGRAPHE

          1,000+ Posts
          • Mar 2008
          • 1095
          #3
          ah the mita 2254 it's an analogue copier machine ..it's older machine too ..we have many copiers with this brand in my countries ..look you started 10871087 and open mode save ...you tape 20 and 21 in numerique number ..and click botton of copy ..you can seeing if the exposure lamp light or no ...if no try controled the exposure cable ...or thermofusible of scanner section ...you must trying this solution and l'm her to assistance to you friend simons
          BEST TECHNICIAN . NICE PEOPLE .

            Comment

            • Simons
              Trusted Tech
              • Jun 2008
              • 490
              #4
              Yes thanks zaza , I dont know anything about the machine. A friend asked for help for his customer. I want to tell him if a simple ohm check on the lamp fails then lamp is burned out. Then try to find a lamp.

              IF ANY more serious than that we would give up on this old machine. But at this time I still am asking for the lamp part number and a place to buy if possible. Thanks for the help.

                Comment

                • Jules Winfield
                  Senior Tech

                  500+ Posts
                  • Jul 2009
                  • 821
                  #5
                  Originally posted by Simons
                  Yes thanks zaza , I dont know anything about the machine. A friend asked for help for his customer. I want to tell him if a simple ohm check on the lamp fails then lamp is burned out. Then try to find a lamp.

                  IF ANY more serious than that we would give up on this old machine. But at this time I still am asking for the lamp part number and a place to buy if possible. Thanks for the help.
                  That model machine is no longer supported by the manufacturer. The only way you might find the lamp (or any other part for this machine) is to contact Kyocera dealers (as there is no Mita anymore) and ask if they have the part. You could try ebay as well, but I doubt you'll find it there.
                  But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.

                    Comment

                    • Simons
                      Trusted Tech
                      • Jun 2008
                      • 490
                      #6
                      Thanks guys and thanks to Blackcat esp.

                      Check his post , up a few again, I had to look again too. They are at Percision roller. I thought I ran a search there but, owell. thanks!

                        Comment

                        • lilythompso8n
                          #7
                          I bought mine at

                          There are two good places where you can find parts for your machine. There's eBay where you might find some good stuff and some bad ones, and there's www.aMatterofFax.com where you can get electronic peripherals for all sorts of copiers. They're tad cheaper too, that's where we got our office copiers

                            Comment

                            Previous template Next
                            Working...