[CQ] KM-C2630 single color issue

[Ingersoll]

I have a KM-C2630 copier that has a CYAN color issue, 2/3s of the page has no CYAN color at all, bottom (front) has some decent CYAN color, color belt (U089) has good color except for CYAN, I have swapped Drum/Dev assy, cleaned LEDs, swapped charge grid, some problem no change. Any ideas?

[madas]

Hi
are these similar to the FS-8026 engine wise? its been a while but i seem to remember a problem like this was caused by the clutch assy drive unit "A" rings the bell's ! sorry if i am thinking of the wrong m/c but hope it helps anyway.

Mad-as

[taskalfaman]

hi,
please check the led, and led holder.
in the past there were some problems, when the pin from the led in the back was not good positioned, you could get a light image for this color.
please check.

[Ingersoll]

Thanks for the info/help

I'll check into it ASAP

hi,
please check the led, and led holder.
in the past there were some problems, when the pin from the led in the back was not good positioned, you could get a light image for this color.
please check.