If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
taskalfa colour machine toner falls from transfer belt
[CQ]
taskalfa colour machine toner falls from transfer belt
i have a problem in some taskalfa colur: the plastic cap of the cleaning group of transfer belt comeout and the toner fall inside the machine.
has anyone had this problem ?
yep,
please clean cl section of the transferbelt, tube,...
probably inside the machine you will have a lot of waste toner, Bypass,...
I suggest to change the transfer belt, because the cl spiral is Nok.
have fun!
Comment