DF670 J81 JAMS

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • banginbishop
    grumpy old git

    500+ Posts
    • Oct 2007
    • 894
    #1

    DF670 J81 JAMS

    Anybody have a fix on this problem? I was asked about this the other day at work but i havent come across it yet and so far a few have been sent back to kyocera as they just cant be fixed.

    on taskalfas i've been told... correct me if im wrong
    Incontinentia Buttocks
    Tags: back, df67, df670, jam, jams, km6500, km8030, kmc3232, kyocera, work, wrong
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22874
      #2
      This finisher is compatible with Stratos machines (CS2560/CS3060/CS300i), but I don't have any of these finishers placed. Sorry, I've got no experience on them. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • banginbishop
          grumpy old git

          500+ Posts
          • Oct 2007
          • 894
          #3
          Originally posted by blackcat4866
          This finisher is compatible with Stratos machines (CS2560/CS3060/CS300i), but I don't have any of these finishers placed. Sorry, I've got no experience on them. =^..^=
          sorry but thats not good enough - consider yourself stripped of ..........................37 rep points for not helping me.
          Incontinentia Buttocks

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22874
              #4
              Damn! I'll try harder next time. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • tmaged
                  Owner/Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Oct 2008
                  • 1850
                  #5
                  I'll give it a shot as long as I don't get stripped.
                  I've fixed it on a C2525E by cleaning the one-way gear on the fuser exit & the one-way on the job separator. We had about 5 visits before we actually saw it jam. It wasn't even making it out of the machine, so the Jam81 was misleading until you actually saw it happen.
                  Hope that helps !
                  -Tony
                  www.dtios.com
                  Become a fan on Facebook

                    Comment

                    • banginbishop
                      grumpy old git

                      500+ Posts
                      • Oct 2007
                      • 894
                      #6
                      cheers bert - i'll have a look next time im in
                      Incontinentia Buttocks

                        Comment

                        Previous template Next
                        Working...