Can a KM-1128 be set to switch trays automatically and where is the setting?
-
-
If you mean auto paper select it is under System Menu -> Copy -> AutoPaperSelect."In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
-
In the web page, go to Printer>media>input>group settings
Group SettingsIf multiple cassettes are available, you can set up to three
groups of cassettes. Cassettes in a group are treated as a
single tray. Paper can be fed continuously from the grouped
cassettes.
Comment
-
For printing or for copying?
Tony's information will enable auto tray switching for copying.
To enable auto tray switching for printing send the following PreScribe command:
!R! FRPO R1,99;EXIT;
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment