HELLO Friends The Touch Panel screen of my KYOCERA 3040 is freez and all the buttons are working,When i Trun ON the machine and press the Copy Button it makes only one copy but the Screen is FREEZ but all the other buttons are woking? please need helpTHANKS ,
-
-
Re: TOUCH PANEL FREEX OF KM
http://www.copytechnet.com/forums/ky...t-working.html
Try this thread. The search function works great on this website. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: TOUCH PANEL FREEX OF KM
OK thanks BLACK CAT I will try on MONDAY, I clean all the Buttons but not the surface of the Display, I will clean the TOUCH PANEL and let you know what happens.THANKSComment
-
voir BT Ref. No. COM-0137 (8645)
<Date> October 27, 2009 : Measure against Operation Failure of the Touch Panel
Topic
If the conductive adhesive resin (adhesive agent for attachment) used at the section between the touch panel and
flat cable became deteriorated/distended due to high temperature/high humidity, the contact pressure at the
adhesive section might decrease, and there might be a possibility that the touch panel on the operation panel did
not respond or that the key different from the pressed key reacted. Therefore, the following change was made.
Contents of Change
The material of the conductive adhesive resin was changed from rubber degenerative phenol resin to epoxy resin,
which is excellent on heat and moisture resistance.Comment
-
Re: TOUCH PANEL FREEX OF KM
Service Bulletin Ref. No. COM-0137 (8645)
<Date> October 27, 2009
Measure against Operation Failure of the Touch Panel
Topic
If the conductive adhesive resin (adhesive agent for attachment) used at the section between the touch panel and
flat cable became deteriorated/distended due to high temperature/high humidity, the contact pressure at the
adhesive section might decrease, and there might be a possibility that the touch panel on the operation panel did
not respond or that the key different from the pressed key reacted. Therefore, the following change was made.
Contents of Change
The material of the conductive adhesive resin was changed from rubber degenerative phenol resin to epoxy resin,
which is excellent on heat and moisture resistance.
Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary
Field Measure: When the phenomenon mentioned above occurs, please replace the touch panel
with the new one.
Serial Nos. of the Affected Machines: (-->)
Please refer to [Serial Nos. of the Affected Machines] on the pages 3 and 4.Comment
Comment