km 3050

[CrapAimer]

Hi looking for some advice dont do Kyochera i am ricoh trained have a customer with a old 3050 eith a bare inch or so of the dev roller when taken out and turned manually the toner does coat it but the minute you try and copy the bare part comes back. Any ideas would be a great help
Many THanks

[marc]

Re: km 3050

Hi looking for some advice dont do Kyochera i am ricoh trained have a customer with a old 3050 eith a bare inch or so of the dev roller when taken out and turned manually the toner does coat it but the minute you try and copy the bare part comes back. Any ideas would be a great helpMany THanks

You need new developer unit

[blackcat4866]

Re: km 3050

This is a monocomponent machine, and you can remove the doctor blade to clean any foreign matter from the developing unit. That may solve your problem. It may require the developing unit, but it costs you only labor to clean. =^..^=