Km c2525e poor color quality

[kingpd@businessprints.net]

Re: Km c2525e poor color quality

Make sure you bill them for it if it wasn't damaged prior to their "cleaning"

[kyogenius]

Re: Km c2525e poor color quality

thanks guys i replaced transfer belb its fine now

[blackcat4866]

Re: Km c2525e poor color quality

"Engine Cleaner"? I wonder what that could be? I hate to think what it could do to a coated rubber belt.

You should advise them that it could cost them extra (often a lot extra) if they continue to help you. =^..^=

[kyogenius]

Re: Km c2525e poor color quality

sure did the sim 89 seems all colors are not bad , but visually my transfer belt looks like its not good my client said they cleaned it with engine cleaner or methlated spirits ,yaah so i wanna try change it, could i be right

[blackcat4866]

Re: Km c2525e poor color quality

Did you run U89 samples to see if only one color is bad?

Yeah. Lets see scans of those U089 gray test patterns. =^..^=

[kyogenius]

Re: Km c2525e poor color quality

will try that sim 89 ,will update you thanks again

[Venom]

Re: Km c2525e poor color quality

Did you run U89 samples to see if only one color is bad?

[kyogenius]

HI my machine c2525e is producing poor quality copies, i dd grayscale adjustments, color registrations ,dev refresh but still its not producing the colors clearly,could it be my transfer belt ,transfer roller or settings that i need to do. please help