Re: 250ci/500ci fading black after mod black dev unit
There was a bad batch of motors at the beginning. There was a bulletin out about them blowing fuses. The new style motors will not do that.
On a similar note, I managed to shoot myself in the foot during an Main HVT replacement. While re-assembling I managed to pinch to frame ground the harness from CN1-1 on the cleaning motor K to YC16-B11 on the engine board. I got C2351 errors, which were not cured by an engine board, or a cleaning motor, or a drum unit. The motor did run, but slowly and at inconsistent speed in service mode.
Like all harness problems I wasted an extraordinary amount of time before tracking the harness from point to point.
Just a thought. =^..^=
There was a bad batch of motors at the beginning. There was a bulletin out about them blowing fuses. The new style motors will not do that.
On a similar note, I managed to shoot myself in the foot during an Main HVT replacement. While re-assembling I managed to pinch to frame ground the harness from CN1-1 on the cleaning motor K to YC16-B11 on the engine board. I got C2351 errors, which were not cured by an engine board, or a cleaning motor, or a drum unit. The motor did run, but slowly and at inconsistent speed in service mode.
Like all harness problems I wasted an extraordinary amount of time before tracking the harness from point to point.
Just a thought. =^..^=
Comment