Re: FS-3140 please wait messge
Cheers RCA this fixed the issue
madas
FS-3140 please wait messge
Collapse
X
-
Re: FS-3140 please wait messge
Thanks for your ideas, I will try and post the fix
Cheers
madasLeave a comment:
-
Re: FS-3140 please wait messge
Hi madas,
The problem is the ISU Pwb ( Image scan unit ),
I had the same problem, in this is case it's necessary replace the ISU.Leave a comment:
-
Re: FS-3140 please wait messge
I have latest firmware if you need..ashish@avtechnology.co.inLeave a comment:
-
Re: FS-3140 please wait messge
Whenever this has come up on other Kyoceras, it has required a firmware fix. Maybe you can try downgrading to a bug-free version? =^..^=Leave a comment:
-
Re: FS-3140 please wait messge
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
cheers
MadasLeave a comment:
-
Re: FS-3140 please wait messge
Hi, HenryT2
I dont think it can be turned off and the mx is 240 mins which it is set at now.
Worked on many of these type of mfp's but not seen this one before not without some sort of noise/error code.
they can still print while this message is on screen but just cant use anthing that requires pressing the start button.
will post fix.
madasLeave a comment:
-
Re: FS-3140 please wait messge
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comLeave a comment:
-
Re: FS-3140 please wait messge
Can you turn the SLEEP mode off on this model ?
If not ... try putting the SLEEP timer at the max ....
Good Luck ...Leave a comment:
-
FS-3140 please wait messge
Hi, just wondered if anyone has had this error.
Turn m/c off comes ready and all functions work, put into sleep mode then power from sleep mode it has the meassage "please wait" no whiring of toner adding nothing like that just sits there. but if you try to do a copy it just beeps,
all other buttons will change to thier respective screen just cannot copy and or use the scan side of things. updated f/w. optics where fithy as in a wharehouse type enviroment so I cleaned them thinking it is having trouble reading the reference plate???? no different disconnected/reconnected a few cables and still the same.
to get it working you need to power off then on and it will work until next sleep mode. weird one.
madasTags: None
Leave a comment: