KM-C3232 Fuser Thermoswith Blowing

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Print-e
    #1

    KM-C3232 Fuser Thermoswith Blowing

    I am having problems with the KM-C3232 where the machine keeps blowing thermoswitches in the fuser, its the one that is inside the fuser belt so impossible to get out without stripping the fuser unit apart. Have you had this problem?

    Let me know.

    Is there a strip down procedure for dismantling the fuser uinits?


    Thanks


    Print-e[/quote]
    Tags: dismantle, fuser, fuser unit, kmc3232, stripping
    • leroyal
      Expert on The Obsolete
      100+ Posts
      • Sep 2007
      • 156
      #2
      It's a recurring problem...replace the fuser unit.
      I know what I know better than anyone else knows what I know.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23008
          #3
          I don't know what's different, but the new style fuser seems to resolve this issue. I don't know if UK part # is the same as US, but the new US# is: 302JD93051.
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • banginbishop
              grumpy old git

              500+ Posts
              • Oct 2007
              • 894
              #4
              Fuser

              Incontinentia Buttocks

                Comment

                Previous template Next
                Working...