co64o{ Km8030 }

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Franky Tan
    • May 2025
    #1

    co64o{ Km8030 }

    At 1st i face with auto feeder faulty whenever i placed original copy on feeder tray,its show reset document processer, but i use u244 to check all sensor and switch its ok.I replaced DP main pcb board ,the feeder still show reset document processer whenever i placed original copy and i use u906 its come out with system error co64o, i replaced engine board and hdd but still cannot settle the problem.thank to all.
    Tags: co64o, ect, erratic, forgot, km8030, supervisor
    • kwazimoto
      Trusted Tech

      100+ Posts
      • Jan 2007
      • 199
      #2

      ISSUE DETAILS Related Models: KM-8030
      Issue Category: ERRATIC OPERATION
      Closed Date: 2006-05-24

      Print Page can not be combine showing reset. then code 0640. tried formatting no help. replaced HDD and formatted stopped with code 4579. then tried the main PCB and format came up with same code. bad HDD & bad paper feed deck pcb, replaced to resolve

      Close If you need to receive additional support for this issue, Be sure to include any additional information or questions that you may have. Also, please be sure to be as descriptive as possible.<H5>Please Click Here



      </H5>

        Comment

        • Franky Tan
          #3
          c6o4o [km8030]

          [quote=kwazimoto;28100]
          ISSUE DETAILS Related Models: KM-8030
          Issue Category: ERRATIC OPERATION
          Closed Date: 2006-05-24

          Print Page can not be combine showing reset. then code 0640. tried formatting no help. replaced HDD and formatted stopped with code 4579. then tried the main PCB and format came up with same code. bad HDD & bad paper feed deck pcb, replaced to resolve

          Close If you need to receive additional support for this issue, Be sure to include any additional information or questions that you may have. Also, please be sure to be as descriptive as possible.<H5>Please Click Here

          Hello ! kwazimoto, when i click H5 i didn't see anything come out
          can u please send again. Thanks to
          u .if u can reply again. Because i need solution on Monday.I thinking to replace DIMM on main board u think is it posible to solve. Anything link with mainboard?how about Hv unit? i remember that i experieced falcon2 machine before co64o appear after i replaced dimm on main board the problem solved.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22973
              #4
              I believe kwasimoto has suggested replacing the HDD and paper feed deck PWB as a set (concurrently).

              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Franky Tan
                  #5
                  Originally posted by blackcat4866
                  I believe kwasimoto has suggested replacing the HDD and paper feed deck PWB as a set (concurrently).

                  =^..^=
                  I will try it tomorrow , keep u inform later. thanks.

                    Comment

                    • Franky Tan
                      #6
                      Originally posted by leaw heng keong
                      I will try it tomorrow , keep u inform later. thanks.
                      My supervisor went down to repair the machine ,been told that HDD got three connector ,the center connector needed jumper which is forgotten by me.

                        Comment

                        Previous template Next
                        Working...