Close cover error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • edgarciarod
    #1

    Close cover error

    Hi everyone, I have a kyocera km-3530 everything was ok whit it until I
    opened the front cover for to clean the residual deposit of the toner, then
    I put it into its place and finally I closed the cover, everything like I always
    do it, but the message in the screen saying "close the cover" never disappeared.
    I don't know what to do .

    I hope that someone there knows what is happening. Thanks in advance.
    Tags: error, front, front cover, km-3530, km8030, kmc3232, kyocera, screen, switch, toner
    • Eric1968
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2459
      #2
      Re: Close cover error

      Broken door switch?

        Comment

        • edgarciarod
          #3
          Re: Close cover error

          Originally posted by Eric1968
          Broken door switch?
          Do you know where can I find it?

          Seems like there is one sensor but I don't know if it is wrong or right .
          Thanks

            Comment

            • MR Bill
              Senior Tech

              500+ Posts
              • Jan 2010
              • 532
              #4
              Re: Close cover error

              Take the right front cover off of the machine and you will see the switch . Remove switch a take it to a electronic store and they can match it up. Are you a tech.? Call one of your venders?

                Comment

                • JustManuals
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2006
                  • 9919
                  #5
                  Re: Close cover error

                  This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


                  Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


                  Paul@justmanuals.com

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22743
                      #6
                      Re: Close cover error

                      First thing to do is to find out which cover switch is giving you trouble. There are at least four switches that can give you "Close Cover" indications. Check each switch to find out which one is not being made (document processor, left upper door, left lower door, and front door). On this model the metal lever on the microswitches can get bent. That's a good place to start. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • MR Bill
                          Senior Tech

                          500+ Posts
                          • Jan 2010
                          • 532
                          #7
                          Re: Close cover error

                          End user blackcat , I gave the simple answer and anything more that that will need a tech.

                            Comment

                            Previous template Next
                            Working...